Mindray - Ventilator - SV300
Non Technical and Terms
- Regulatory Approval - CE Marked
- Initial Delivery Time - varies by country
- Price Basis - Ex-Works
- Pricing Incoterm - CIP 2020
- Warranty - 18 months
Pricing:
Country Set A:
Afghanistan, Argentina,Bangladesh,Bosnia and Herzegovina, Cambodia, Georgia, Kenya, Lao People’s Democratic Republic, Nepal, North Macedonia, Pakistan, Sri Lanka
Country Set B:
Bhutan, Marshal Islands, Papua New Guinea, Samoa ,Maldives, Fiji
Training
Supplier shall provide in-person or on-line training adequate to meet the needs of all operators. Training shall be available in English, Spanish and French, and shall be available to users within two (2) weeks of equipment delivery. (Cost of training quoted on when a Registration of Interest is received).
Manuals
User Manuals: Supplier shall provide at least one (1) user manual for each device purchased. Manuals shall provide guidance on the operation of all features of the purchased device, be provided in at a printed format, and be available in English, Spanish and French.
Service Manuals: Supplier shall provide at least one (1) service manual for each device purchased. Manuals shall provide at least, equipment schematics, parts summaries, preventive maintenance requirements, and troubleshooting guidance, be accessible in printed formats, and be available in English.
Mindray (www.mindray.com) is a global provider of medical devices and solutions including patient monitoring and life support, invitro diagnostics, and medical imaging equipment. Mindray has one of the largest medical device manufacturing facilities in China.
Ventilators
Ventilators are pieces of medical equipment that provide ventilatory support to patients who cannot maintain adequate ventilation or oxygenation on their own due to illness, trauma, congenital defects or drugs.
Ventilators typically consist of a flexible breathing circuit, a pneumatic system, a control system, monitors and alarms. Depending on the type and complexity of the ventilator, the gas is delivered either using a single or dual limb breathing circuit. Most ventilators are microprocessor controlled to control the pressure, volume, and Fi02. Power is supplied from either an electrical wall outlet and/or a battery.
All ventilators require a source of oxygen. Critical care ventilators always require a source of oxygen at high pressure (approximately 4 Bar) while other ventilators require a high pressure or low flow (2-15 l/m) source of oxygen, depending on the individual ventilator. Mechanical ventilators have several operating modes which are chosen by clinicians to define breath initiation and end (i.e., cycle) as well as adjustable parameters such as pressure and flow. Different modes can also provide either full or partial ventilatory support, depending on the individual patient’s condition and clinical requirements.
High Flow Delivery Devices
High-flow oxygen delivery systems, commonly referred to as a High Flow Nasal Cannula (HFNC) supply a given oxygen concentration at a higher than normal flow rate to the patient. These systems generally consist of three parts: the flow generator, an air-oxygen blender, and a heated humidifier. The heated and humidified air-oxygen is delivered to the patient via a specially designed nasal cannula.
The benefits of high-flow oxygen include the improvement of gas exchange and the decrease in the work of breathing. High-flow devices are capable of delivering a maximum flow of 60 l/min and all require a high-pressure source of air and oxygen at approximately 4 bars.